Product Description
The TP-Link TL-SG1008P Gigabit Desktop Switch is an eight 10/100/1000 Mb/s port unmanaged switch that requires no configuration and provides 4 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE 802.3af compliant PDs (Powered Devices). In this situation, the electrical power is transmitted along with data in one single cable, allowing you to expand your network to where there are no power lines or outlets, where you wish to connect devices such as APs, IP cameras, IP phones, and more.
Key Features
- 8 x Port Gigabit Ethernet Ports
- 4 x PoE Compliant Ports
- IEEE 802.3af Compliant
- 30 Watts PoE Power per Port
- 16 Gbps Switching Capacity
- 8K MAC Address Table
- Auto-MDI/MDIX Support
- 802.3x Flow Control
- Plug-and-Play Design
- Dedicated LED Status Indicators
Power Over Ethernet
Four of the 8 auto-negotiation RJ-45 ports (port 1 to port 4) of the switch support PoE (Power over Ethernet) function. These PoE ports can automatically detect and supply power with the IEEE 802.3af compliant PDs (Powered Devices). Supports PoE power up to 15.4W for each PoE port, a total of up to 53W for all PoE ports, and supports priority function to protect the system when the system power is overloaded.
Overload Arrangement
Features priority function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is 53W a priority will be arranged among the PoE ports, and then the system will cut off the power to the lowest-priority port.
Port Priority Function
Priority (port 1 > port 2 > port 3 > port 4): This function will help protect the system if the system power becomes overloaded. For example, Port 1, 2, and 4 are using 15.4W (maximum power per port is 15.4W), the system power is 46.2W in total (PoE max LED is red). If there is an additional PD inserted to port 3 with 10W, then the system will cut of port 4 to protect the system, this means ports 1 and 2 will use 15.4W, and port 3 will use 10W, and no power will be supplied to port 4.
High Performance
Features Auto-MDI/MDIX, auto-negotiation, store and forward, IEEE 802.3x flow control for Full-duplex Mode, back pressure for half-duplex mode, and 8K MAC address auto-learning and auto-aging.
Easy To Use
It requires no configuration and installation. With desktop design, outstanding performance, and quality, this switch is a great selection for expanding your home or office network. It has a plug-and-play and fanless design.
Additional Features
Supports flow control, back pressure, and fanless operation.
HARDWARE FEATURES | |
---|---|
Interface | 8× 10/100/1000 Mbps RJ45 Ports AUTO Negotiation AUTO MDI/MDIX |
Network Media | • 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) • EIA/TIA-568 100Ω STP (maximum 100m) • 100BASE-TX: UTP category 5, 5e cable (maximum 100m) • EIA/TIA-568 100Ω STP (maximum 100m) • 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m) • EIA/TIA-568 100Ω STP (maximum 100m) |
Fan Quantity | Fanless |
Physical Security Lock | Yes |
External Power Supply | External power adapter (Output: 54VDC / 1.3A) |
Packet Forwarding Rate | 11.904 Mpps |
PoE Ports (RJ45) | • Standard: 802.3 af/at compliant • PoE Ports: ports 1–4 • Power budget for all PoE ports: 64 W |
Mac Address Table | 4K |
Jumbo Frame | 16 KB |
Switching Capacity | 16 Gbps |
Dimensions ( W x D x H ) | 6.7 × 3.9 × 1.1 in (171×98×27 mm) |
Max Power Consumption | • 5.4 W (with no PD connected) • 75 W (with 64W PD connected) |
Max Heat Dissipation | • 18.4 BTU/h (with no PD connected) • 225.8 BTU/h (with 64 W PD connected) |
SOFTWARE FEATURES | |
---|---|
Transmission Method | Store-And-Forward |
Advanced Functions | • Compatible With IEEE 802.3af/at Compliant PDs • IGMP Snooping • Mac Address Auto-Learning And Auto-Aging • IEEE802.3x Flow Control • 802.1p/DSCP QoS |
OTHERS | |
---|---|
Certification | CE, FCC, RoHS |
Package Contents | • TL-SG1008P • Power Adapter • Installation Guide |
Environment | • Operating Temperature: 0–40 ℃ (32–104 ℉); • Storage Temperature: -40–70 ℃ (-40–158 ℉) • Operating Humidity: 10–90% RH non-condensing • Storage Humidity: 5–90% RH non-condensing |