Tycon System UPS-ST12-50-600 12V 50Ah Batt, 12V 600W

Tycon System UPS-ST12-50-600 12V 50Ah Batt, 12V 600W

92.00 LBS
0 Stars
Usually Ships in 24 Hours
Calculated at checkout

Product Description

The UPSPro® ST-600W series outdoor enclosures are designed for applications that require a backup power source in order to maintain uninterrupted service to customers. The enclosure is powered from 120/240VAC. It is also solar ready so a solar panel can be added as an alternate power source or to extend backup time. Features include an advanced MPPT battery charge controller to protect against over-charging or over-discharging of the valve regulated sealed lead acid AGM batteries. Enclosures have multiple ports for CAT5 cable, antenna cables/connectors or other cabling. They are vented to prevent residual buildup of hydrogen gas.

There is some space inside the enclosures for customer electronics such as controllers, wireless AP or CPE cards, sensors, inverters, etc. Equipment runs on battery power which isolates it from power line surges which is a main cause of outdoor equipment failure.

Multiple configurations are available for 12V or 24V systems with various battery storage capacities.

A typical high power wireless access point with average power consumption of 8W will run 40 hours on a 52Ah battery at room temperature or 28 hours at -20 deg C.


  • Weatherproof, UV resistant, outdoor enclosures
  • Powered from AC mains power and/or Solar
  • Interior space for customer electronics
  • Wall or Pole Mounting
  • Isolates Customer Equipment from Power Line Surges
  • High Quality AGM Sealed Lead Acid Batteries
  • Advanced battery charge controller protects against overcharge and over discharge


  • Wireless Base Stations and Clients
  • Surveillance Cameras
  • Wireless Bridge and Repeaters
  • Remote Sensors
  • Mission critical outdoor power
  • Backup Power Systems


Battery Voltage (DC)


Input Voltage (AC)

120/240VAC, 50/60Hz, 5A Max.

Capacities (Amp Hr) @ 12V

50Ah (1 battery)

Avail Storage Capacity (Watt Hr)


Max Output Power


Suggested Maximum Load


Maximum Instantaneous Load

20A 500msec

Battery Type

Valve Regulated Sealed Lead Acid / Absorbent Glass Mat (AGM)

Battery Life

5 Years

Battery Cable Fuse

6 x 32mm Ceramic 30A 250V

Controller Type

40A MPPT Solar Controller with Status Display and 20A Load with on/off switch

Maximum Solar Panel Size


Controller Display Status

Battery Voltage, Charging Voltage, Charging Current, Load Current, Temperature

Overcharge Protection


Over-discharge protection


Over-discharge recovery voltage


Controller Self Consumption


Enclosure Type

Powder Coated Steel – Pole/Wall Mount 

Enclosure External Size

24 x 15 x 14" (610 x 381 x 356mm)

Enclosure Internal Size

23 x 14 x 12" (584 x 356 x 305mm)

Operating Temperature

-30°C to +60°C (-22°F to 140°F)

System Weight (without batteries)

55lb (25kg)

Battery Weight (each)

37lb (17kg)


Individual components used have CE Certifications. Batteries have CE and UL.


3 Years 

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Write your own product review

Find Similar Products by Category

Vendors Other Products

Click the button below to add the Tycon System UPS-ST12-50-600 12V 50Ah Batt, 12V 600W to your wish list.